You may have heard that a silicone roof coating is expensive and hard to apply. While you are likely to find many contractors offering this service, keep in mind that this type of roofing coating is difficult to apply properly, which drives up the cost. Additionally, if a contractor isn’t experienced, the application can end up being messy and damaging to your roof. So, make sure to hire a professional. If you are unsure about the process, read on to learn about what to expect when hiring a contractor to apply this type of roof coating.

Inland’s Total Roof Premium 1-Coat High Solids Silicone Roof Coating

One of the benefits of a premium one-coat high-solids silicone roof coating is that it is highly durable. The coating can last up to 10 years, and can even extend the life of a roof. Roofing contractors can apply the coating themselves or contract with a professional to do it for them. For added peace of mind, Inland offers a 10-year warranty.

Total-Roof Premium 1-Coat High-Solids Silicone Roof Coating is solvent-free and has excellent waterproofing properties. It can be applied in one coat and cures within two to five hours. This roofing coating requires no primer. It can be applied up to 40 mils in a single coat without blistering. It is environmentally friendly and can help you meet LEED certification requirements.

Total Roof Ure-A-Sil

Thermo-Sil Pro ™ 9600 is the ultimate high-solids silicone roof coating for roofing professionals. Its advanced direct-bond technology offers unparalleled adhesion and exceptional water resistance. This coating creates a seamless water-resistant membrane and provides superior protection from UV light, ponding water, and severe weather. This silicone roof coating is ideal for a variety of roofing applications.

The one-coat, moisture-curing silicone roof coating is designed for use over existing BUR, acrylic coating, and concrete roofs. Its high-solids content allows it to be applied over 40 mils without blistering. It offers maximum adhesion and is LEED-compliant, contributing to the LEED rating of the building. The coating bonds to existing roofing materials such as modified bitumen, concrete, and metal roofs. It also resists aging, wind-driven sand, extreme heat, and ultraviolet radiation.

Lexis Silicone Roof Coating

Using Lexis Silicone Roof Coating is an excellent way to improve your building’s exterior, as this 100% silicone roof coating is designed to provide maximum protection and long-lasting performance. The Lexis coating is perfect for low-slope, flat roofs, which tend to pond water. The coating also makes surfaces reflective, extending the life of your roof while saving energy and money. As a downside, the Lexis coating is slippery when damp, increasing the risk of injuries when walking on a steep-sloped roof.

The process of applying the roof coating doesn’t improve the underlying system or insulation. If your roof is in good shape, you should still consider applying the coating, but it will only give you about 10 years more of service. It will also make your building more energy-efficient and cooler. Here are a few tips to get started. First, power-wash your roof to remove any contaminants. Next, apply a primer made of epoxy. This will prepare the surface for adhesion.


A Ure-A-Sil silicone roof restoration system restores a wide range of flat roofing substrates. The combination of urethane base coat and silicone top coat provides industry-leading UV protection and reflectivity. It is also highly cost-effective, at a fraction of the cost of a complete roof replacement. In addition to restoring the aesthetic appearance of a building, it also reduces energy bills and lowers internal temperatures.

This moisture-cured silicone roof coating has excellent insulating capabilities and resists standing water, chemical exposure, and staining. Thermo-Sil is available in high-solids and low-solids formulas. THERMO-SIL PRO, the ultimate high-solids silicone roof coating, is designed for roofing professionals who need exceptional adhesion, outstanding low-temperature flexibility, and superior protection against high winds. Thermo-Sil is easy to apply by roller, squeegee, or sprayer.


The Met-A-Sil roof coating system is a premium solution for metal roofs, providing outstanding UV protection, reflectivity, and performance. It is fluid applied and offers superior adhesion. The Met-A-Sil system uses high-solids silicone roofing to restore your metal roof. To learn more about the benefits of this roof coating system, read on. This article will explain how the Met-A-Sil system can improve the life of your commercial and industrial metal roof.

The white Karna-Sil Ultra is a low-VOC single-component solution that produces a highly elastic, weatherproof coating. It has outstanding UV protection and is compatible with virtually any existing roofing system. This roof coating provides superior protection against ponding water, UV light, and severe weather. It is safe for use on single-ply roofing systems and is suitable for application over existing coatings.