commercial roof coating

When it comes to choosing a commercial roof coating, there are many important factors to consider. Consider how it will affect your building’s overall aesthetics, how it will resist ponding, and more. Read on to learn more about these important factors and more. Then, contact a roofing contractor to discuss the options available for your roof. Listed below are some of the most popular types of commercial roof coatings and what each one has to offer.

Reflectivity

Reflectivity of commercial roof coatings is a great option for reducing energy costs and minimizing the impact on the environment. The application process is straightforward, and the coating can be applied to any type of commercial roof. After installation, proper maintenance is necessary, including regular cleaning and touch-ups. Typically, this process takes a few hours each quarter, and a reflective roof coating is well worth the effort. However, there are a few things to consider before getting it installed.

First, consider how much impact will a reflective roof coating have on the interior climate of a building. Most commercial roofing materials do not prevent the heat of the sun from permeating through the structure of the roof. This causes the building’s interior temperature to increase, increasing energy costs. A reflective roof coating will minimize this energy-wasting heat transfer by as much as 20 degrees. Also, reflective coatings are low-maintenance, which means you will save money on repairs and maintenance.

UV resistance

If you own an industrial building, it is important to protect the structure of the roof with a coating that is resistant to ultra violet rays. Ultraviolet rays can damage roof structures more rapidly than anything else, so it is imperative that you have a commercial roof coating that can protect it. There are many types of roofing material, including silicone, acrylic, and polyurethane. Aromatic polyurethane is cheaper but has less UV resistance, so it should be used as a base coat.

UV rays cause breakdown processes in various materials. Plastics, rubber, neoprene, and polyvinyl chloride are all susceptible to UV degradation. Metals such as steel are a good choice for commercial roofs as they are resistant to UV degradation. Acrylic elastomeric roofing systems are another option for commercial roofs. Some types of polyvinyl chloride and acrylic roof coatings are UV resistant.

Resistant to ponding

A Resistant to Ponding commercial roof coating is a type of coating that stays bonded to the substrate when water collects. According to the National Roofing Contractors Association (NRCA), roof ponding is a condition in which water can pool on the roof for up to 48 hours. Without proper ponding protection, the coating can blister and suffer corrosion, which can lead to untimely roof failure.

The acrylic type of commercial roof coating is not resistant to ponding water. It will deteriorate and start peeling away from the substrate after about two years. This problem is present in virtually every building. However, an acrylic coating has a low resistance to UV rays, and it is best used on low-slope or flat roofs. A water-based product made of polyester has excellent ponding resistance.

Cost

The process of choosing the best commercial roofing coating requires some research and understanding of the pros and cons of each type. Some coatings are better than others, and some work better in certain conditions. Cost is also a factor to consider when choosing a new roof. A good roofing contractor will have a full understanding of the different types and how to properly apply them. The final decision is a matter of preference and budget. This article provides an overview of the various types and their benefits.

Acrylic: An acrylic coating is water-based and generally comes in white, tan, or gray. However, they are also available in a range of colors and can be applied to specific substrates. Water-based acrylics are often less expensive, but they may not last as long. Butyls are the most common option for commercial buildings. Acrylic coatings require less upkeep and do not emit as many volatile organic compounds.

Application methods

There are several different application methods for commercial roof coating. These include roller, airless spray machine and brush/broom. However, all three methods are not equally effective. The method that works best for your roofing needs depends on the size and shape of the area to be coated. To ensure a uniform coating, apply the coating in multiple layers. When using rollers, choose a roller with a medium nap. Also, make sure to apply the coating in the same direction as the rollers’ direction of travel.

The best way to protect your building’s roof is to apply a high-quality commercial roof coating. However, many commercial buildings experience premature coating failures due to improper application methods. These problems can cause the roof system to fail before its time. So, if you’re looking to restore your roof, contact Pisgah Roofing and Restoration for the most effective roofing coating application. We can provide you with thorough and accurate information on the application methods for your specific type of roofing system.